Download BLU Vivo XL2 Firmware, Flash Tool And Driver
The official BLU Vivo XL2 Stock Firmware is here with driver tool and guide. BLU_Vivo XL2 is now available on the market and after some weeks or days will available lots of mods, custom ROM and TWRP. That’s why always keep BLU Vivo XL2 firmware to repair. You can also update Vivo XL2 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick BLU Vivo XL2 V0070EE / V0070UU.
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware of BLU Vivo XL2 V0070EE / V0070UU. By installing this BLU Vivo XL2 stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick BLU Vivo XL2. Stock firmware doesn’t void the warranty of your device. The BLU Vivo XL2 Firmware is now available for all regions. So let’s go the instruction to download BLU Vivo XL2 Firmware.
BLU Vivo XL2 Stock Firmware:
| Android Version | Android 6.0 (Marshmallow) |
| Country | All |
| Device name | BLU Vivo XL2 |
| Model | V0070EE / V0070UU |
| Status | Official |
BLU Vivo XL2 specification: The previous year, BLU released Vivo XL2 with Android Android 6.0 (Marshmallow). This device runs on 1.4 GHz Quad-core Mediatek MT6737T processor and it comes with 3 GB of RAM. Vivo XL2 comes with 5.5 Inch IPS LCD capacitive touchscreen of 720 x 1280 pixels. It has 32 GB of internal storage.
The BLU_Vivo XL2 brings Dual 13-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for perfect selfies. It has Non-removable Li-Po 3150 mAh battery. The sensors in this device are an Accelerometer, proximity, compass.
Download BLU Vivo XL2 Firmware:
| Model: | File Size | File Name: |
|---|---|---|
| V0070EE | 1.58 GB | BLU_V0070EE_V08_REPAIR.zip |
| V0070UU | 1.85 GB | BLU_V0070UU_V07_GENERIC_T5682.zip |
Guide To Install Firmware:-
- Extract downloaded.zip (firmware file).
- Install USB drivers.
- Now open the Smart Phone Flash tool (flash_tool.exe).
- Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
- Now hit the download button.
- Switch off your phone and connect your phone to the PC by pressing vol down key.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
Note: The first time it takes 5-10 minutes to boot.
