Cubot R11 Firmware With SP Flash Tool And Driver

The official Cubot R11 Stock Firmware is here with driver tool and guide. Cubot R11 is now available on the market and after release TWRP and root method, you can install lots of mods, custom ROM and much more. To keep your device safe always save Cubot R11 firmware to repair. You can also update Cubot R11 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Cubot R11.

Download Cubot R11 Stock Firmware

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for Cubot R11. By installing this stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Cubot R11. Stock firmware doesn’t void the warranty of your device. The Cubot R11 Firmware is now available for all regions with play store. So let’s go the instruction to download the Firmware.

Cubot R11 Specification:

This year, Cubot released Cubot R11 with Android 8.1.0 (Oreo). This device runs on 1.3GHz octa-core MediaTek MT6580 processor and it comes with 2 GB of RAM. This device comes with a 5.5 inches IPS LCD capacitive touchscreen with 1440 x 720 pixels. It has 16 GB of internal storage.

This device brings the Dual 13-Megapixel + 2.0-Megapixel rear camera to capture good quality images and 8.0-Megapixels front-facing camera for the selfies. The device powered by Non-removable Li-Po 2800 mAh battery. It has a Light sensor, Distance sensor, G-sensor, Fingerprint sensor.

Firmware Details:

• Android Version: Android 8.1.0
• Android Name: Oreo
• UI Version: Stock UI
• Device name: Cubot R11
• Country: All.
• Status: Official

Download Cubot R11 Firmware

We have uploaded the latest Cubot R11 firmware, SP Flash Tool and MTK driver so you can download directly from our site. This firmware helps you to many software issues and also unbrick Cubot R11.

Guide To Install Firmware:

• Download Tool, Driver, Firmware
• Then extract firmware.zip, Tool, driver.
• Now install USB drivers.
• After that open the Smart Phone Flash tool (flash_tool.exe).
• Then click the Scatter-loading button and browse and select the extracted firmware [MT6580_Android_scatter.txt] file which you have already downloaded.
• Now hit the download button.
• Switch off your phone and connect your phone to the PC by pressing vol down key.
• After the flashing, a green tick will appear.
• Disconnect your phone and turn it on.

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.